38
Advertising
WARNING SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
Rangemaster range cookers One of the UK’s best loved range cooker brands, the Rangemaster name is synonymous with range cooking. The Rangemaster collection has everything covered from hugely popular traditional models like the Classic, Classic Deluxe and Elan Deluxe through to the sleek modern aesthetic of the Professional and Professional Deluxe, Hi-Lite and Nexus ranges.
13. To Remove an Oven Door
Open the oven door. Loosen the two top hinge screws.
Support the weight of the door and remove the screw
nearest the hinge pin. Swing the hinge up and away from the hinge pin on the door. Lift the door away from the bottom hinge.
Re-assemble in reverse order.
When replacing the door ensure that the nylon hinge
bush is in position between the hinge pin and the hinge bracket at the both the bottom and top.
14. To Change Oven Door Outer Panel
Move the cooker forward to gain access to the sides.
Open the oven door slightly and remove the front panel
fi xing screws from the door sides (two each side).
Carefully lift off the outer door panel.
Remove door handle from panel by unscrewing 2
retaining nuts. Fit door handle to new panel
Fit panel to door. Reassemble in reverse order.
15. To Change Oven Door Latch
Remove outer door panel
(see 14). Remove screws ‘B’ holding latch assembly to inner door panel. Fit new catch and reassemble in reverse order.
Check correct door
operation.
16. To Adjust an Oven Door Catch Keep
Open oven door, slacken off locknut at base of keep, and
screw in or out as required until required fi t is obtained. Retighten locking nut.
17. To Change Oven Door Seals
Main ovens
Open oven door. The seal is held in place by small hooks
on the rear face. At the corner pull seal diagonally away from the door centre until that hook is released. Proceed to the next hook and release it in a similar way, and so on. Use force if the hooks are stiff , as the old seal will be discarded.
When fi tting new seal, position the seal join at the
bottom. Hook the new seal in one of the corner holes of the door, and proceed round the door snapping in each hook in turn.
Slow Cook Oven door seals
There are two parts to the door seal a top ‘gaol post’ part,
that can be unhook in a similar way to the main oven seals, and a separate bottom seal.
To replace the door bottom seal the door must be
removed. Remove right hand side panel (see 3). Remove the plinths and the central vertical cover (5 screws). Remove the two countersunk screws (1 each side) securing the hinge arms to the front of the chamber.
NOTE: The arms are spring tensioned. Carefully remove
the door. Retain the gaskets. The door bottom seal is now accessible and can be unclipped and replaced.
Reassemble in reverse order ensuring that the gasket
is fi tted between the hinge arm and the front of the chamber.
18. To Remove Grill Element.
Disconnect from electricity supply.
Remove grill pan from grill chamber. From inside grill
compartment remove enamelled front shield from grill roof, 2 screws and washers. Remove 2 screws and washers securing the grill element front support. Remove the screws from the grill elements.
Lift elements out carefully, disconnect the leads from
the element terminals noting their position. If it is not possible to disconnect the leads in this way, pull cooker forward to gain access to the rear, remove screws securing the electric cover to the back sheet and remove cover and disconnect the terminals from the rear.
Fit new elements, reassemble in reverse order. Check
operation of grill.
Advertising
Popular Brands
Popular manuals
Advertising
37
WARNING SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
6. To
Remove
Clock Hp photosmart premium c309a user manual filetype pdf.
Disconnect from electricity supply.
Remove the Control Panel (See 1). Pull off the timer
control buttons.
Remove the timer/mounting bracket assembly from the
control panel by removing the fi xing screws.
Remove the timer from its mounting bracket by
depressing the plastic lugs on the timer case, at the same time pulling the unit forward.
Reassemble in reverse order. When replacing leads refer
to the wiring diagram. Check operation of timer.
7. To Remove an oven Thermostat
Disconnect from the electricity supply.
Remove control panel and hotplate (see 1 & 2). Open
oven door. Remove oven furniture and slide out oven roof liner if fi tted. Pull cooker forward to gain access to the cover box at the rear of the cooker. Remove Marathi novels in pdf format. the screws securing the cover and lift clear. The oven thermostat capillary is clamped to the oven back sheet with an earthing plate. Remove the screws and plate.
thermostat capillary
earthing plate
Flv player mac download deutsch. Left Hand Main oven
Rangemaster Professional Plus 110 Instruction Manual
Remove the two screws holding the thermostat phial to
the oven fan cover at the rear of the oven.
Right hand Main oven and Slow Cook oven
Remove thermostat phial cover (2 screws). Unclip the
thermostat phial from the clips on the oven back.
Slow cook oven thermostat phial cover. Download winrar for os x.
Feed the thermostat capillary out of the oven.
Disconnect wiring from thermostat. Remove 2 screws holding thermostat to mounting panel. Fit new thermostat and reassemble in reverse order. Ensure that the phial is clipped to the oven back with the phial centrally positioned between the clips. https://yellowless442.weebly.com/blog/kubota-service-manual-free-download.
Remember to refi t the earthing plate.
Check operation of thermostat.
8. To Change the Grill or Ceramic hob Controller
Disconnect from the electricity supply.
Remove the control panel and hotplate (see 1 & 2).
Disconnect wiring from controller. Remove 2 screws holding controller to mounting panel. Fit new controller and reassemble in reverse order. Check for correct operation. Rangemaster Professional Plus 110 User Guide
BEFORE SERVICING ANY GAS CARRYING COMPONENTS
TURN OFF GAS SUPPLY.
9. To
Change
Hotplate Mens tourneau gear watch user manual.
Taps
Disconnect from the electricity supply.
Remove the control panel and hotplate (see 1 & 2).
Unplug the FSD lead from the rear of the tap. Undo
compression fi tting at the rear of the tap. Remove the fi xings that secure the tap to the gas rail. Disconnect the ignition switch wiring.
Remove the tap. Remove and discard the gasket seal.
Fit new gasket seal to replacement tap. Re-assemble in reverse order. Check the appliance is gas sound. Check hotplate ignition.
10. To Change Hotplate Burner Injector
Remove burner cap and head. Remove old jet. Fit new
injector. Reassemble in reverse order. Check appliance is gas sound.
11. To Change Hotplate Burner Electrode
Lift off pan supports, remove burner cap. Remove the
screw holding the electrode. Pull electrode vertically up suffi
ciently to grip the lead between thumb and
forefi nger. Pull off the electrode, but keep hold of the
lead. Fit new electrode to the lead. Fix electrode in burner with screw. Replace burner cap. Check the burner ignition. Replace pan supports.
12 To Remove or Change a Hotplate Burner.
Remove the hotplate tray (see 2).
The burners except the right hand wok burner
are mounted on support struts. For these burners, disconnect the burner feed pipes at the burner. Remove the screws at the front and rear holding the support struts. Lift the strut and burners clear. The burners are fi xed to the support struts with 2 screws. Remove the appropriate burner and fi t the new one. Reassemble in reverse order. Check burner operation is satisfactory.
RH Wok burner
Disconnect the burner feed pipes at the burner. Fit the
new one and reassemble in reverse order. Check burner operation is satisfactory.
Advertising
Popular Brands
Popular manuals
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |